Your BMW 7 Series Generation Determines the Correct Part
Before you can set up your Pedal Commander, you need to confirm which version fits your specific BMW 7 Series. The controller is model-specific: the part number PC10 covers the 7 Series, but the exact variant depends on your chassis generation and engine.
The Pedal Commander for BMW 7 Series is compatible with the E38 (2000–2001), E65/E66/E67/E68 (2001–2008), F01/F02/F03/F04 (2008–2015), G11/G12 (2015+), and G70/G73 (2023+) generations. Each listing includes specific engine trims—from the 2.8L M52 inline-six in the E38 to the 4.4L S68 twin-turbo V8 in the G70. The controller works with gasoline, diesel, hybrid, and even electric powertrains on the latest models.
When ordering, select the option that matches your chassis code and engine. For example, a 2024 BMW 740i with the B58 engine uses the G70/G73 (2023+) variant. If you are unsure, check your vehicle's VIN or production date to match the correct listing.
Fitment Facts at a Glance
- Pedal Commander for BMW 7 Series: PC10 / BMW / 7 Series / G11-G12 (2015+) / (730i-740i-740d-740e xDrive-745e xDrive-750i-M760i xDrive) If you own a 2016 or newer 7 Series (G11/G12), this variant fits models from the 730i to the M760i xDrive, covering both standard and hybrid powertrains.

Pedal Commander for BMW 7 Series - Pedal Commander for BMW 7 Series: PC10 / BMW / 7 Series / G70-G73 (2023+) / (3.0L B58 - 4.4L S68 Twin Turbo V8 - 3.0L B58 PHEV - 3.0L B57 Diesel MHEV - Electric) The latest 7 Series generation (G70/G73) is supported, including the electric i7. This variant accommodates the B58, S68 V8, plug-in hybrid, diesel mild-hybrid, and full electric powertrains.
How to Set Up the Pedal Commander on Your BMW 7 Series
Once you have the correct Pedal Commander for your 7 Series, follow these steps to install and adjust the throttle response. The supplied evidence does not include detailed installation instructions, so these steps are based on general Pedal Commander procedure for similar vehicles. Always refer to the included manual for your specific model.
- 1. Locate the accelerator pedal position sensor: The Pedal Commander connects between the accelerator pedal and the vehicle's wiring harness. On most BMW 7 Series models, the sensor is located above the accelerator pedal. Disconnect the vehicle's battery negative terminal before starting.
- 2. Plug the Pedal Commander into the harness: Unplug the factory connector from the pedal sensor. Connect the Pedal Commander's male connector to the sensor and the female connector to the factory harness. Ensure a snug fit.
- 3. Mount the control module: Use the included double-sided tape or zip ties to secure the module in a convenient location, such as under the dashboard or near the kick panel. Keep it away from moving parts and heat sources.
- 4. Reconnect the battery and start the engine: After reconnecting the battery, start the engine. The Pedal Commander will power on and display the current mode. The default mode is usually Eco or City.
- 5. Select your desired throttle mode: Use the buttons on the module to cycle through the modes: Eco, City, Sport, and Sport+. Each mode adjusts the throttle response curve. For daily driving, City or Sport offers a good balance. For the most aggressive response, choose Sport+.
- 6. Fine-tune with the adjustment knob (if equipped): Some Pedal Commander versions have a knob to adjust the response intensity within each mode. Turn clockwise for sharper response, counterclockwise for smoother. Start with a middle setting and adjust based on feel.
What the Listing Does Not Confirm About Installation and Setup
The product record for the Pedal Commander BMW 7 Series does not include specific installation instructions, operating steps, or care guidelines. The steps above are based on the general procedure for similar Pedal Commander installations. For precise details, consult the manual that comes with your unit or contact Pedal Commander support.
The listing also does not specify whether the controller is pre-programmed for your exact engine or if any additional calibration is needed. In practice, the Pedal Commander is plug-and-play: it modifies the throttle signal without requiring software updates. However, if you experience any issues, verify that you selected the correct variant for your chassis and engine.
A Practical Setup Sequence for Your 7 Series
Start by confirming your 7 Series generation and engine using the variant options. Then order the correct Pedal Commander. Once installed, begin with City mode to get a feel for the reduced throttle lag. After a few days, try Sport mode for a more responsive pedal. If you want the sharpest response, use Sport+, but be aware that it may feel too aggressive for stop-and-go traffic.
The Pedal Commander does not increase horsepower; it reduces the electronic throttle delay that BMWs often have. For a large luxury sedan like the 7 Series, this can make the car feel more eager without sacrificing comfort. The controller remembers your last mode even after the car is turned off, so you only need to set it once.


